Cleaning these objects in the right way would give you nothing to be ashamed about as you drive around town. They can be like a gold medal around your neck since you are fully aware that you have personally attended to them. So, eventually get the hang of the routine below and treat it as your accomplishment.
Look for a pressure washer which can take all of the main dirt from these things. Cleaning wire spoke wheels do not have to be hard once you have already eliminated the dirt that people would be able to see. The pressure can also take away rust and grime which would be too gross for you to touch.
Any mild soap will have to do with the solution for this stage. Detergents will only reduce the quality of the stainless silver. So, stick with the prescribed product and be ready to take on the spokes one by one. Also, have a uniform movement for all the strokes which you will be making.
The next product to the solution will be a reliable cleaner. With this chemical, it will be like you have not used your objects in ages. Thus, wipe vigorously and do not worry about this substance burning your skin. It is safe to use without any gloves and that will even be perfect for you to check the cleanliness of this metal.
If you have flat shoelaces, use them to secure the position of the wheels. You need as much force as you can to have a dirt free surface especially when you are getting near to the beautification part. Any dust can cause an uneven surface to what you are working on make you start all over again and waste time.
The rest of the laces can be your polish brush. Remember that the spokes can really be thin. You cannot use your bare hands on this since that will leave marks and make you fail in trying to be friends with people who are already good with this. So, practice with those laces.
Minimize the amount of polish on the laces but not too much. Also, cover the rubber if you can. The least thing that you need right now is a wheel with marks. These marks can be permanent if you will not wipe them out right away. Therefore, exercise extreme caution and try not to go out of the zone by keeping your eyes and your focus on each spoke.
Be patient enough in allowing the polish to dry. That can take an hour depending on the uniformity in which you have applied it. Also, do not directly expose these things to the sun. You can just let them dry with the use of open air so that the rays would not make the polish melt in any way.
Do not forget about the wax. This is what will complete the new look of your wheels. The polish can be removed after a few days which is why you need the final component to keep it all together for another month or so. Apply this stuff accordingly
Look for a pressure washer which can take all of the main dirt from these things. Cleaning wire spoke wheels do not have to be hard once you have already eliminated the dirt that people would be able to see. The pressure can also take away rust and grime which would be too gross for you to touch.
Any mild soap will have to do with the solution for this stage. Detergents will only reduce the quality of the stainless silver. So, stick with the prescribed product and be ready to take on the spokes one by one. Also, have a uniform movement for all the strokes which you will be making.
The next product to the solution will be a reliable cleaner. With this chemical, it will be like you have not used your objects in ages. Thus, wipe vigorously and do not worry about this substance burning your skin. It is safe to use without any gloves and that will even be perfect for you to check the cleanliness of this metal.
If you have flat shoelaces, use them to secure the position of the wheels. You need as much force as you can to have a dirt free surface especially when you are getting near to the beautification part. Any dust can cause an uneven surface to what you are working on make you start all over again and waste time.
The rest of the laces can be your polish brush. Remember that the spokes can really be thin. You cannot use your bare hands on this since that will leave marks and make you fail in trying to be friends with people who are already good with this. So, practice with those laces.
Minimize the amount of polish on the laces but not too much. Also, cover the rubber if you can. The least thing that you need right now is a wheel with marks. These marks can be permanent if you will not wipe them out right away. Therefore, exercise extreme caution and try not to go out of the zone by keeping your eyes and your focus on each spoke.
Be patient enough in allowing the polish to dry. That can take an hour depending on the uniformity in which you have applied it. Also, do not directly expose these things to the sun. You can just let them dry with the use of open air so that the rays would not make the polish melt in any way.
Do not forget about the wax. This is what will complete the new look of your wheels. The polish can be removed after a few days which is why you need the final component to keep it all together for another month or so. Apply this stuff accordingly
About the Author:
You can visit www.texanwirewheels.com for more helpful information about How To Maintain Cleaning Wire Spoke Wheels.
No comments:
Post a Comment