With money being tight today, maybe the answer to giving your car a fresh look will be to indulge in several car spray painting. If the mechanics of it are in good shape, but the body is not so hot, then painting it will be the best solution.
Its a great money saver, but even more so if you do it yourself as opposed to getting it professionally done up. You could do it if you read the basics and follow the instructions for car spray painting. It's fundamental though if you decide you're going to take on this project that youre ready to see it finished till the end.
First of all, you need a couple of supplies. These consist of:
-coverings to protect the unpainted areas and masking tape to hold these in place -a good car-wash soap and brush as well as a wax/grease remover. -several grits of sand-paper -primers and paint thats urethane base for the car spray painting -paint sprayer -safety equipment like masks, goggles and protective clothing -knife and putty for fill ins.
1 : You must be certain that you wash the car thoroughly to get rid of every grime and debris. If you dont then these things will be set in with your paint, leaving a truly frustrating look to the finished job. Follow up with a wax/grease remover so the paint you apply for the car spray painting will adhere the right way.
Two : Remove any rough spots by sanding. Once this has been done be certain to rinse off whatever of the loose sandings. This's where you would want to utilize the putty to fill in whatsoever minor pit marks, that are have been caused from stones for illustration.
Three : Do not get in too much of a rush to start your car spray painting. The car must be wholly dry so it's best to leave it to do so for a few hours. You could go ahead and cover whatsoever of the areas that your don't want to get paint on.
4 : At present youre ready to begin with the primer. Dont skip this step, as it'll give a much improved look to the finished project. It helps the paint to adhere the right way and allows for a more even finish. Next, once the primer is dry you will need to softly sand it down.
Five : Youre finally at the step you have been waiting for. It's time to apply the color for your car spray painting. Whether you have chosen to use aerosol paints or a spray gun, the premise remains the same. Just apply thin coats. Several would likely be needed. Many light coats are much better than 1 thick coat. You'll be able to tell just by looking at the car how many more coats of paint it will require. A few will only need 2 where as some others might need 3 or four.
Six : Finally, down to the last step and thats applying the clear coat. This is done precisely the same as the colored coats.
Now you could clean up, take a step back and look up to the masterpiece youve produced.
Its a great money saver, but even more so if you do it yourself as opposed to getting it professionally done up. You could do it if you read the basics and follow the instructions for car spray painting. It's fundamental though if you decide you're going to take on this project that youre ready to see it finished till the end.
First of all, you need a couple of supplies. These consist of:
-coverings to protect the unpainted areas and masking tape to hold these in place -a good car-wash soap and brush as well as a wax/grease remover. -several grits of sand-paper -primers and paint thats urethane base for the car spray painting -paint sprayer -safety equipment like masks, goggles and protective clothing -knife and putty for fill ins.
1 : You must be certain that you wash the car thoroughly to get rid of every grime and debris. If you dont then these things will be set in with your paint, leaving a truly frustrating look to the finished job. Follow up with a wax/grease remover so the paint you apply for the car spray painting will adhere the right way.
Two : Remove any rough spots by sanding. Once this has been done be certain to rinse off whatever of the loose sandings. This's where you would want to utilize the putty to fill in whatsoever minor pit marks, that are have been caused from stones for illustration.
Three : Do not get in too much of a rush to start your car spray painting. The car must be wholly dry so it's best to leave it to do so for a few hours. You could go ahead and cover whatsoever of the areas that your don't want to get paint on.
4 : At present youre ready to begin with the primer. Dont skip this step, as it'll give a much improved look to the finished project. It helps the paint to adhere the right way and allows for a more even finish. Next, once the primer is dry you will need to softly sand it down.
Five : Youre finally at the step you have been waiting for. It's time to apply the color for your car spray painting. Whether you have chosen to use aerosol paints or a spray gun, the premise remains the same. Just apply thin coats. Several would likely be needed. Many light coats are much better than 1 thick coat. You'll be able to tell just by looking at the car how many more coats of paint it will require. A few will only need 2 where as some others might need 3 or four.
Six : Finally, down to the last step and thats applying the clear coat. This is done precisely the same as the colored coats.
Now you could clean up, take a step back and look up to the masterpiece youve produced.
About the Author:
Now you can learn professional car paint repairs and bodywork painting in 2 hours or less with step-by-step DVD video training. Master the techniques of car spray paint with SprayPaintSecrets today.
No comments:
Post a Comment