With split system air conditioning, the indoor unit is separated from the outdoor components or else the condenser. Split simply means separation and therefore the condenser is placed in a convenient place on the outside either on the ground or hanged up on the walls. In large buildings they are positioned in groups but each has its own features depending on the model.
One requires to consider some factors before choosing the size of the air conditioning. One of them is determining the number of indoor units required. At normal conditions each room uses a single unit although in homes with open areas one is able to cool multiple rooms.
The condenser is connected to the indoor unit with the help of copper pipes or electrical wires which are fitted by experienced technicians. Refrigerant gas is then pushed to the indoor units from the condenser coil but it must be passed through a compressor to increase its pressure. Cold air is quietly distributed by a fan across the evaporator coils.
Split air conditioning systems control the amount of cold air flowing into a room through thermostats or infra red remotes. Each room is designed to maintain a certain temperature depending on its use. This technique is greatly employed in residential house as the sitting room can be conditioned during the day and the bedroom at night.
The split air conditioning systems can also be used to control the temperature levels of supermarkets and retail shops since they are at times too cold or hot depending on the weather conditions. It is also possible to regulate the living room during the day and the bedroom at night. Since recent buildings demand more space, special offices can be constructed and be used to store some apparatus.
The split air conditioners work great as the condenser can be located outside the office and wires with connection pipes be run into the room. The ceiling units or inside wall are extra cost effective as they distribute air with precision. The system can be installed in several places since with it no duct work or distribution techniques are required.
In split system air conditioner, the condenser can even be positioned outside the office and connection pipes be run to the room. Air is distributed in the room through then ceiling units or pipes which are fitted on the walls. This technique does not require much duct work or distribution knowledge and because of this it can be installed in a number of areas.
One requires to consider some factors before choosing the size of the air conditioning. One of them is determining the number of indoor units required. At normal conditions each room uses a single unit although in homes with open areas one is able to cool multiple rooms.
The condenser is connected to the indoor unit with the help of copper pipes or electrical wires which are fitted by experienced technicians. Refrigerant gas is then pushed to the indoor units from the condenser coil but it must be passed through a compressor to increase its pressure. Cold air is quietly distributed by a fan across the evaporator coils.
Split air conditioning systems control the amount of cold air flowing into a room through thermostats or infra red remotes. Each room is designed to maintain a certain temperature depending on its use. This technique is greatly employed in residential house as the sitting room can be conditioned during the day and the bedroom at night.
The split air conditioning systems can also be used to control the temperature levels of supermarkets and retail shops since they are at times too cold or hot depending on the weather conditions. It is also possible to regulate the living room during the day and the bedroom at night. Since recent buildings demand more space, special offices can be constructed and be used to store some apparatus.
The split air conditioners work great as the condenser can be located outside the office and wires with connection pipes be run into the room. The ceiling units or inside wall are extra cost effective as they distribute air with precision. The system can be installed in several places since with it no duct work or distribution techniques are required.
In split system air conditioner, the condenser can even be positioned outside the office and connection pipes be run to the room. Air is distributed in the room through then ceiling units or pipes which are fitted on the walls. This technique does not require much duct work or distribution knowledge and because of this it can be installed in a number of areas.
About the Author:
Frost Air Conditioning Sydney supply and install split system air conditioners since 1971 so click here for the latest a/c systems and installation specials.
No comments:
Post a Comment